Io Board; Disconnect Io Ffc From Mb - Asus X510 Series Disassembly And Assembly

Disassembly Procedure

IO Board

The illustrations below show how to disassemble and remove the IO Board.

1. Disconnect IO FFC from MB.

Assembly notice: 1) Insert FFC to the bottom until just accord with the line when lock the latch.
2) Please check whether the appearance of FFC/FPC is intact (not broken) and press the cable carefully before
assembly.
2. Remove 1 screw from hinge, pull up the hinge and take the IO board away.
Assembly Notice: Screw tightening torque: 3.0± 0.25kgf-cm
2 - 18
V1.0