Accessories, Tools; Disposal; Warranty; Eu Declaration Of Conformity - Festool MFK 700 EQ Original Operating Manual/Spare Parts List

• To ensure constant air circulation, always
keep the air vent slits in the motor housing
clean and free of blockages.
The machine is equipped with self-discon-
necting special carbon brushes. If they are
worn, power is interrupted automatically and
the machine comes to a standstill.

10 Accessories, tools

Use only original Festool accessories and
Festool consumable material intended for
this machine because these components are
designed specifi cally for the machine. Using
accessories and consumable material from
other suppliers will most likely affect the
quality of your working results and limit any
warranty claims. Machine wear or your own
personal workload may increase depending
on the application. Protect yourself and your
machine, and preserve your warranty claims
by always using original Festool accessories
and Festool consumable material!
The order numbers of the accessories and
tools can be found in the Festool catalogue or
on the Internet under "www.festool.com".

11 Disposal

Do not throw the power tool in your house-
hold waste! Dispose of machines, accesso-
ries and packaging at an environmentally-
responsible recycling centre. Observe the
valid national regulations.
EU only: European Directive 2002/96/EC
stipulate that used electric power tools must
be collected separately and disposed of at
an environmentally responsible recycling
centre.

12 Warranty

For our tools, we give warranty for material
and production defects in accordance with
the locally applicable legal provisions, but in
any case for at least 12 months. Within the
EU member states, the warranty period is
24 months (verifi cation through invoice or
delivery note). Damage caused by, in par-
ticular, natural wear, overloading, incorrect
handling, or damage caused by the operator,
or damage caused through use of the equip-
ment contrary that specifi ed in the operat-
ing manual, or damage which was known
at the time of purchase, is not covered by
the warranty. Furthermore, damage caused
by the use of non-original accessories and
consumable materials (e.g. sanding pads)
is also excluded.
Complaints can only be recognised if the
tool is returned while still assembled to the
supplier or an authorised Festool Customer
Service workshop. Keep the operating man-
ual, safety instructions, spare parts list and
purchase receipt in a safe place. Otherwise
the respective, current warranty conditions
of the manufacturer shall apply.
Note
Due to continuous research and develop-
ment work, we reserve the right to make
changes to the technical content of this
documentation.

13 EU Declaration of Conformity

Modular router
MFK 700 EQ
Year of CE mark: 2007
We declare under sole responsibility that this
product complies with the following norms
or normative documents:
EN 60745-1, EN 60745-2-17, EN 55014,
EN 61000 in accordance with the regula-
tions stipulated in Directive 98/37/EC (until
28 Dec. 2009), 2006/42/EC (from 29 Dec.
2009), 2004/108/EC.
Dr. Johannes Steimel
Head of research and development
Festool GmbH, Wendlingen, Germany
16
Serial no.
494964, 494973