5.
If the units have another condition, reset as above.
• To change the parameters
1.
Use the
2.
Use the
parameter.
3.
Press SET to store them in memory.
SET
5)
Set up the slave machine
1.
While an initial screen is displayed, press FUNC twice to display the second function menu.
FUNC FUNC
• You can perform the above operation while the initial screen of the Memo Mode, Schedule
Keeper, Calendar, or Reminder is displayed also.
2.
Press 4 to select DATA COMM.
4
3.
Press 2 to select RECEIVE.
2
6)
Set up the customer's machine.
1.
While an initial screen is displayed, press FUNC twice to display the second function menu.
FUNC FUNC
• You can perform the above operation while the initial screen of the Memo Mode, Schedule
Keeper, Calendar, or Reminder is displayed also.
and — cursor keys to change the selected parameter on the display.
and
cursor keys to change the high-lighted setting of the currently selected
1* TO SECRET AREA
2
ALL DELETE
3
LABEL EDIT
4
DATA COMM
CAPS
1
SEND
2
RECEIVE
3
SET UP PAR.
CAPS
RECEIVE OK
DATA
TO STOP
PRESS (ESC)
CAPS
1* TO SECRET AREA
2
ALL DELETE
3
LABEL EDIT
4
DATA COMM
CAPS
— 8 —
* If the password isn't
registered in the SF unit,
display shows
X
instead
of "1".
* If the password isn't
registered in the SF unit,
display shows
X
instead
of "1".