Note For Windows Xp Users - ZyXEL Communications ZyXEL ZyAIR AG-220 Quick Start Manual

the grayed-out text field. You will need to enter this PIN in
the WPS screen of the AP.
2 Launch your AP's configuration utility, go to the screen
where you can configure the WPS settings and enter the
AG-220's PIN (an example screen from ZyXEL's
NWA570N is shown).
3 Click Start in the AG-220 Adapter screen and Apply or
Start in the AP's WPS screen within two minutes.
The AP authenticates the AG-220 and sends the proper
configuration settings to the AG-220. This may take up to two
minutes. The AG-220 is now able to communicate with the AP
securely.
Congratulations - you have finished!

Note for Windows XP Users

If you want to use WZC, either disable the ZyXEL utility (if you
already installed it) or just install the driver.
ENGLISH
12