Using The Configuration Utility; Configuration Utility Main Screen; Figure 10 Pl-100 Configuration Utility Main - ZyXEL Communications ZyXEL ZyAIR 100 User Manual

Using the Configuration Utility

After the hardware and software are installed successfully, you can set up and adjust your network. In
order to run the configuration utility, double-click the utility icon. To do this,
and
Zyxel Software and click on PL-100 Configuration Utility.
the main screen of the configuration utility.

4.1 Configuration Utility Main Screen

The Main screen essentially provides a list of all powerline devices logically connected to the
computer where the utility is running.
Figure 10
Chapter 4 Using the Configuration Utility
PL-100 Configuration Utility Main
C
H A P T E R
click Start, Programs
Figure 10 on page 29
PL-100 User's Guide
4
below shows
29