Before You Start; Preparing Your Network - ZyXEL Communications ZYWALL 100 Read Me First
Zyxel communications network card user manual
Hide thumbs
Also See for ZYWALL 100:
- User manual (356 pages) ,
- Quick start manual (13 pages) ,
- Brochure & specs (2 pages)
Advertisement
IP Address: 192.168.1.1
Password: 1234
You need a broadband modem and an account with an Internet Service Provider (ISP).
1. Your user (account) name and password.
2. Encapsulation (Ethernet, PPTP or PPPoE)
3. You may need to know your Service Name if you are using PPTP or PPPoE.
4. Service type, when using Ethernet (Standard, RR-Toshiba, RR-Manager or RR-Telstra.
5. The IP address(es) of the Domain Name System server(s) if supplied by your ISP.
All computers must have a 10M or 100M NIC (Network Interface Card) and TCP/IP installed.
TCP/IP should already be installed on computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.
Installing TCP/IP Components
1. Click Start, Settings, Control Panel and double-click the Network icon.
2. The Network window Configuration tab displays a list of installed components.
To install TCP/IP:
a.
In the Network window, click Add.
b. Select Protocol and then click Add.
c.
Select Microsoft from the list of manufacturers.
d. Select TCP/IP from the list of network protocols and then click OK.
Configuring TCP/IP
1. In the Network window Configuration tab, select your network adapter's TCP/IP entry and click Properties.
2. Click the IP Address tab. Click Obtain an IP address automatically.
3. Click the DNS Configuration tab. Select Disable DNS.
4. Click the Gateway tab. Highlight any installed gateways and click Remove until there are none listed.
5. Click OK to save and close the TCP/IP Properties window.
6. Click OK to close the Network window.
7. Turn on your ZyWALL and restart your computer when prompted. Insert the Windows CD if prompted.
Verifying TCP/IP Properties
Before You Start
Before You Start
ZYWALL FACTORY DEFAULTS
Network Access Checklist
Network Access Checklist
Preparing Your Network
Preparing Your Network
These procedures are for dynamic IP addresses.
Set ting up Yo ur W ind ow s 95 /98 /Me C omp ute r
Subnet Mask: 255.255.255.0
DHCP IP Pool: 192.168.1.33 – 192.168.1.64
Advertisement
