Table of Contents
Advertisement
P-661H/HW Series User's Guide
15.6.4 Bandwidth Management Priorities
The following table describes the priorities that you can apply to traffic that the ZyXEL
Device forwards out through an interface.
Table 98 Bandwidth Management Priorities
PRIORITY LEVELS: TRAFFIC WITH A HIGHER PRIORITY GETS THROUGH FASTER WHILE
TRAFFIC WITH A LOWER PRIORITY IS DROPPED IF THE NETWORK IS CONGESTED.
High
Mid
Low
15.7 Configuring Summary
Click Advanced > Bandwidth MGMT to open the screen as shown next.
Enable bandwidth management on an interface and set the maximum allowed bandwidth for
that interface.
Figure 136 Bandwidth Management: Summary
The following table describes the labels in this screen.
Table 99 Media Bandwidth Management: Summary
LABEL
Interface
Active
240
Typically used for voice traffic or video that is especially sensitive to jitter (jitter
is the variations in delay).
Typically used for "excellent effort" or better than best effort and would include
important business traffic that can tolerate some delay.
This is typically used for non-critical "background" traffic such as bulk transfers
that are allowed but that should not affect other applications and users.
DESCRIPTION
These read-only labels represent the physical interfaces. Select an interface's check box
to enable bandwidth management on that interface. Bandwidth management applies to
all traffic flowing out of the router through the interface, regardless of the traffic's source.
Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the ZyXEL
Device and be managed by bandwidth management.
Select an interface's check box to enable bandwidth management on that interface.
Chapter 15 Bandwidth Management
Advertisement
Table of Contents
Troubleshooting
