Flash Key Commands; Intercom - ZyXEL Communications omni.net LCD+M Technical Reference

Technical Reference for ZyXEL omni.net series

Flash Key Commands

Feature Phone Flash Key
operation Commands
Hold/Release/Cancel
Press the Flash
key
Press the Flash
Call Waiting
key and 0
Press the Flash

InterCom

key and 2
Three-Way
Press the Flash
Conference key and 3
Press the Flash
Call Reject
key and 5
Press the Flash
Last Number Redial
key and * *
Press the Flash
key and * nn *
phone-number #
Quick Dial
Press the Flash
key and * nn * #
Press the Flash
key and * nn #
InterCom
Your omni.net can work as an InterCom by connecting two phones to Phone 1 and Phone 2 analog
ports at the rear panel of your omni.net.
6-2
1. Put caller on hold.
2. Resume with caller presently on hold.
Cancel the second dial connection attempt.
1. Answer the incoming call and place the existing call on hold.
2. Switch back and forth between the two calls; either two
remote calls or one remote call and one local call.
3. Put a call on hold to place a second call.
1. Dial to another local phone.
2. Transfer the call to another local phone.
Create three-way conference connection in Mixing mode
(1 remote party and 2 local parties or 2 remote parties and 1
local party.)
1. Reject the second incoming call.
2. Disconnect the current phone connection.
Allows you to redial the last number called on POTS port
Phone 1 and 2.
To record a phone number for quick dial.
(Note: nn=00-09, stored phone number index)
To clear a quick dial number
To dial a stored phone number quickly
Table 33. Flash Key Commands
Description