ZyXEL Communications P-2302HWUDL-P1 Quick Start Manual page 5

Note: If you press the DECT base station button for 12 seconds or more, the DECT base station resets
and all previously registered DECT phones must be re-registered.
2 Put your DECT phone in registration mode. Refer to your DECT phone documentation.
When the P-2302HWUDL-P1 is in registration mode, the LED of the DECT base station button (A) blinks and
the P-2302HWUDL-P1 starts to scan its surrounding area for DECT phones in registration mode.
Note: To ensure clear communication between the two devices, make sure your DECT phone is within
range of the P-2302HWUDL-P1 during the registration process. See the User's Guide for details.
3 When a P-2302HWUDL-P1 discovers a DECT phone in registration mode, it sends a request for a
Personal Identification Number (PIN). Your DECT phone receives the request and prompts you to enter the
PIN. Enter the PIN in the DECT phone by using the handset keypad. Entering a PIN ensures that only
authorized DECT phones connect to and use your P-2302HWUDL-P1 to make and receive calls.
Note: The default PIN of the P-2302HWUDL-P1 is 1234.
4 Repeat steps 1 - 3 to register additional phones.
Note: You can register up to 6 DECT phones with the P-2302HWUDL-P1.
Once your DECT phones are registered with the P-2302HWUDL-P1 you can assign SIP accounts to make
and receive VoIP calls. You can also use DECT phones to make internal calls, see your DECT phone
documentation for more information. Internal calls are calls between DECT phones registered with the P-
2302HWUDL-P1. For the P-2302HWUDL-P1 you can also assign your DECT phones to receive calls from the
PSTN line (regular phone line).
P-2302HWUDL-P1 Quick Start Guide
5