Manually Set Time/Date: Program Menu - La Crosse Technology BBB86118 Faqs

 Position the digital clock in a window (with the front or back) facing Ft. Collins,
Colorado and leave for up to five nights. If you do not have a window facing this
direction, position the clock near an outside wall and point the unit in this
general direction.

Manually Set Time/Date: Program Menu

There are seven function buttons: SNOOZE, ALARM, ALERTS, SEARCH, SET,
+(PLUS), and - (MINUS).
Time set order:
 Beep ON/OFF
 Atomic ON/OFF
 Time Zone
 DST ON/OFF
 Hour
 Minutes
 Year
 Month
 Date
 Fahrenheit/Celsius
Note: Press SNOOZE at any time to exit all setting menus.
Note: 20 seconds without button press will return to normal time display.
1. Hold the SET button for 3 seconds to enter set mode.
2. BEEP ON will appear. Press the +/- buttons to turn OFF the beep sound.
3. Press the SET button to confirm and select Atomic ON/OFF.
4. ATOMIC ON will show. Press the +/- buttons to turn OFF the Atomic time signal.
Note: If ATOMIC is set to OFF, you will skip the next two items and go directly
to the Hour.
5. Press the SET button to confirm and select Time Zone.
6. TIME ZONE EST will show. Press the +/- buttons to select your time zone.
AST=Atlantic, EST= Eastern, CST= Central, MST= Mountain, PST= Pacific, AKT=
Alaska, HAT=Hawaiian
7. Press the SET button to confirm and select Daylight Savings Time ON/OFF.
8. DST ON will show. Press the +/- buttons to turn that OFF if you do not observe
Daylight Saving Time).
9. Press the SET button to confirm and select the hour.
10.HOUR will appear. Press the +/- buttons to adjust the hour.
11.Press the SET button to confirm and select the minutes.
12.MINUTES will appear. Press the +/- buttons to adjust the minutes.
13.Press the SET button to confirm and select the year
14.The YEAR will appear. Press the +/- buttons to adjust the year.
15.Press the SET button to confirm and select the month.
16.The MONTH will appear. Press the +/- buttons to adjust the month.
17.Press the SET button to confirm and select the date.
18.DATE will appear. Press the +/- buttons to adjust the date.
19.Press the SET button to confirm and select the temperature unit.
20.TEMP °F will appear. Press the +/- buttons to select °C.
21.Press the SET button to confirm and exit.
La Crosse Technology, Ltd Page 9