No Wwvb Tower Icon; Set Time Alarm; Activate/Deactivate Time Alarm; Snooze Alarm - La Crosse Technology BBB86118 Faqs

Hide thumbs Also See for BBB86118:
Table of Contents

Advertisement

No WWVB Tower Icon

 The digital clock has not received a WWVB time signal in the past 24 hours.
Position
the digital clock for better reception.
 Press and release the SEARCH button to send the digital clock on a WWVB signal
search at night.
 Allow up to 5 nights to receive the time signal.

Set Time Alarm

The alarm will be active when set.
1. Press and release ALARM: Alarm Hour will show
2. Use the +/- button to select.
3. Hold then release ALARM 3 seconds: Alarm Minutes will show
4. Use the +/- button to select.
5. Press and release the ALARM button to confirm and exit.

Activate/Deactivate Time Alarm

 The alarm is active when set.
 From normal time display, Press and release and release the ALARM button to
deactivate or activate the alarm.
 The alarm icon (clock) will show when active.

Snooze Alarm

 When the alarm sounds, Press and release the SNOOZE button to silence the
alarm for 10 minutes.
 The snooze icon Zz will flash.
 Press and release any button except SNOOZE to silence the alarm for 24 hours.
 This is a crescendo alarm. It will sound for 2 minutes then shut off if no buttons
are Press and released.
Digital clock has distorted or frozen display
Explanation: On a brand new digital clock, check for thin plastic film of printed
scratch guard that may be on the screen of the digital clock. This thin piece of
plastic has printed numbers for store displays. When the batteries are installed, the
"real" numbers show behind the printed scratch guard and create distortion.
 With all power removed, the digital clock should be blank.
 If numbers still appear, please check for scratch guard.
Power:
 Check that the batteries are installed correctly.
 This is generally a power related issue.
Batteries
may be overpowered or underpowered.
 Remove batteries from digital clock.
 Press any button 20 times. Leave the batteries out of the display for 2 hours.
 Insert batteries into the digital clock.
La Crosse Technology, Ltd
Page 10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bbb86118v2

Table of Contents