ZyXEL Communications 2R-P1C User Manual page 30

P-2301/2R-P1C / P-2301RL-P1C User's Guide
When I pick up the phone's receiver, I hear no
dial tone.
Check the connection between your telephone and the ZyXEL
Device. See section 3.
Test the telephone wire.
1 Connect the wire to a telephone and a regular telephone
outlet.
2 If you cannot hear the dial tone, the wire might be broken.
Use a different one.
If the problem continues, contact your local vendor.
I cannot make VoIP phone calls.
or
The dial tone beeps or pulses.
Log in to the ZyXEL Device. Select Go to Advanced setup. The
Status screen appears. In the VoIP Status section (at the
bottom), make sure at least one of the VoIP accounts is
registered. If neither account is registered, click Register for the
VoIP account(s) that you set up in section 4.34.3.
If the problem continues, contact your vendor.
30