Royal Sovereign RBC-ED250-CA Owner's Manual page 9

CONTROL PANEL AND OPERATION
3. LEVEL SET - In MENU screen, use the "▼ " or "▲" buttons to select LEVEL SET. Press
"ENTER/START" to enter LEVEL SET.
The settings are already set at the default recommended settings as outlined below
1. UV LEVEL 3.
2. MG LEVEL 3.
3. DD LEVEL 3
4. DOUBLE LEVEL.3
To change the level sensitivity settings, press the "▼" or "▲" buttons to select the item you wish to
change and ensure it is highlighted on the screen. Each sensitivity has 5 levels: (1.low, 2-4.middle,
and 5.high), press number button 4 or 6 to minus or add one sensitivity level. Press "ENTER /
START" to set this setting. Repeat the steps above if you wish to make additional changes
4. WARN COUNT SET – In MENU screen, use the "▼ " or "▲" buttons to select WARN COUNT SET.
Press "ENTER/START" to enter WARN COUNT SET.
OFF
WARN COUNT/ON means the counterfeit note is included in the amount;
WARN COUNT/OFF means the total amount doesn't include the counterfeit notes
To change setting, press the "▼" or "▲" buttons to select the setting. Next press "ENTER/START"
5. DATE/TIME – In MENU screen, use the "▼ " or "▲" buttons to select DATE/TIME. Press
"ENTER/START" to enter DATE/TIME.
The screen will display "YYYY-MM-DD HH:MM:SS". Use the "▼" or "▲" buttons to minus or add one
for the value to set the date and time. Press the number 4 or 6 buttons on the control panel to go to
the left or right option on the screen. When complete, press "ENTER/START"
(Continued)
This setting is defaulted to WARN COUNT
8