Zoom X5 User Manual page 33

HTTP server access
HTTP server port
FTP server
DHCP Relay
DHCP Target IP
IGMP Proxy
PPP reconnect on WAN
access
PPP Half Bridge
Chapter 2: Advanced Setup Options
Default is Restricted LAN. Choices are All
(WAN and LAN); Restricted WAN and/or
LAN. If restricting WAN access, be sure to
fill in the IP address and subnet mask
address of the device that is
communicating in from the Internet.
Port number to use for Web access; for ex.,
if you change it to 1001, the modem's
HTTP server address on either side would
be http://10.0.0.2:1001.
Disabled by default. Enabling this feature is
useful strictly for Technical Support
diagnostics.
Disabled by default. Enabling this feature
forces all local PCs' DHCP requests to be
forwarded to the WAN DHCP server.
Important: Be sure to disable the LAN
DHCP server (navigate back to the
Advanced Setup page and LAN Settings
to do so; see page 20 for instructions).
IP address of the device that you want to
function as the DHCP server.
Disabled by default. Select enable, then
navigate back to the Advanced Setup
page and WAN Settings to set up your
IGMP proxy. See page 18 for instructions.
Disabled by default. Enabling this feature
ensures that the PPP session is
automatically established when a packet is
ready to be transferred over to the WAN.
Disabled by default. Enabling this feature
forces the DHCP server to duplicate the
X5's WAN IP address to one local client
computer; thus, only one computer on the
LAN can access the Internet at a time.
33