Parts List - Otto SY-103D3-E3-C9-600 Instruction Manual

Parts list

In order to make the installation of your extraction hood as simple as possible,
all individual parts are consecutively numbered: The number in bold print is the
part number that will assist you in identifying the individual components.
Before starting installation, please check to make sure that all individual Before starting installation, please check to make sure that all individual
components are present and undamaged.
1 Extraction hood
2 upper and lower chimney facing
3 attachment bracket
4 1x external & 1x internal metal plate for chimney facing
5 Check valve
6 screws 4x10mm
This material is not included in the scope of delivery. It is available at the
Material for wall installation
specialist retailer (e.g. a hardware store).
7 2 wall plugs ø 8 mm
8 2 screws 40 mm, ø 6 mm
Only use installation material that is suitable for the structure of
Caution!
your walls. If you are unsure about the selection, seek advice from a
specialist.
Information
1
2
3
4
5
6
7
8
7
English