Connecting to a Smartphone (Bluetooth Connection)
Follow a simple connection setup procedure (pairing) to connect to a smartphone that supports Bluetooth Low Energy. When
pairing is set up, the Wi-Fi connection will be established automatically by just operating "LUMIX Sync".
●
For the first-time connection, pairing settings are required. For information about connecting for the second time onwards
(
217
/
Connecting to a Paired
●
Supported smartphones
Android™: Android 5 or higher with Bluetooth 4.0 or higher
(excluding those that do not support Bluetooth Low Energy)
iOS: iOS 11 or higher
●
Turn on the smartphone's Bluetooth function in advance.
1
On the smartphone, start up "LUMIX Sync".
●
A message regarding device (camera) registration is displayed. Select [Next].
●
If you have closed the message, select [ ], then register the camera using [Camera registration (pairing)].
2
Check the content in the displayed guide and select [Next] until the screen to register
the camera is displayed.
Operating the camera in accordance with the smartphone guide.
3
Set the camera to Bluetooth pairing standby state.
●
[MENU/SET]
[ ]
●
The camera enters pairing standby state and the device name
12. Remote Operations - Connecting to a Smartphone
Smartphone)
[ ]
[Bluetooth]
[Bluetooth]
[SET]
[Pairing]
A
is displayed.
- 215 -
- 215 -