[Loop Recording (Video)] - Panasonic DC-BGH1 Operating Instructions Manual

[Loop Recording (video)]

Even when recording uses up the card's free space, the camera continues the recording by deleting the oldest segment of the
recorded data.
1
Set [Rec. File Format] to [MOV].
●
[MENU/SET] [
2
Set [Loop Recording (video)].
●
[MENU/SET] [
● [ ] is displayed on the recording screen.
When the recording fills the card to capacity, loop recording starts and video recording time is no longer displayed.
●
● Make sure the camera does not turn off during recording.
● Loop recording cannot start if there is insufficient available capacity on the card.
● When the recording time exceeds 12 hours, recording continues with data being deleted in order from the point where
recording started.
● When the following functions are being used, [Loop Recording (video)] is not available:
– [Rec Quality] with a bit rate of 400 Mbps
– [Variable Frame Rate]
– [Live Cropping]
6. Special Video Recording - [Loop Recording (video)]
] [ ] [Rec. File Format]
] [ ] [Loop Recording (video)]
[MOV]
[ON]
- 127 - - 127 -