Still Picture And Frame-By-Frame Playback; Search; Random; Repeat - Zenith DVR313 Installation And Operating Manual

Operation with DVD and Video CD (Continued)
General Features (Continued)

Still Picture and Frame-by-Frame Playback

DVD Video VR VCD2.0
1 Press PAUSE (X) during playback.
The recorder will now go into PAUSE mode.
2 You can advance or back up the picture frame-by-
frame by pressing b / B repeatedly during PAUSE
mode.
ote
The picture frame-by-frame in reverse is not available
for Video CD.

Search

DVD Video
1 Press and hold SKIP/SCAN (. or >) for about
two seconds during playback.
The recorder will now go into SEARCH mode.
2 Press and hold SKIP/SCAN (. or >) to select
the required speed: mX2, mX4, mX8, mX16,
mX100 (backward) or MX2, MX4, MX8,
MX16, MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
3 To exit SEARCH mode, press PLAY (N).

Random

Karaoke DVD
1 Press RANDOM during playback or in Stop mode.
The unit automatically begins Random Playback and
"RANDOM" appears on the display window.
2 To return to normal playback, press RANDOM until
"RANDOM" disappears from the display window.
ip
By pressing SKIP/SCAN > during Random playback,
the unit selects another title (track) and resumes
Random playback.
ote
This function only works with DVD Karaoke discs or
video CDs without PBC.
On a Video CD with PBC, you must set PBC to OFF
in the Setup menu to use the Random function. See
page 21.

Repeat

DVD Video
REPEAT
CHAPTER
DVD Video Discs - Repeat Chapter/Title/Off
1 To repeat the currently playing chapter, press
REPEAT.
The REPEAT CHAPTER appears on the TV screen.
2 To repeat the title currently playing, press REPEAT a
second time.
The REPEAT TITLE appears on the TV screen.
VCD1.1
VR VCD2.0 VCD1.1
VCD2.0 VCD1.1
VCD2.0 VCD1.1
VR
3 To exit Repeat mode, press REPEAT a third time.
The REPEAT OFF icon appears on the TV screen.
Video CDs - Repeat Track/All/Off
1 To repeat the track currently playing, press REPEAT.
The REPEAT TRACK icon appears on the TV screen.
2 To repeat the disc currently playing, press REPEAT a
second time.
The REPEAT ALL icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The REPEAT OFF icon appears on the TV screen.
ote
On a Video CD with PBC, you must set PBC to OFF in the
Setup menu to use the Repeat function. See page 21.

Repeat A-B

DVD Video VR VCD2.0
REPEAT
A - B
To repeat a sequence in a title:
1 Press A-B at your chosen starting point.
REPEAT A- appears on the TV screen.
2 Press A-B again at your chosen end point.
REPEAT A-B appears briefly on the TV screen, and the repeat
sequence begins ("REPEAT A-B" also appears in the display
window).
3 To cancel the sequence, press A-B repeatedly to
select OFF.

Time Search

DVD
TIME
0:10:30
The Time Search function allows you to start playing at
any chosen time on the disc.
1 Press DISPLAY during playback. The on-screen dis-
play appears on the TV screen.
The Time Search box shows the elapsed playing time of the
current disc.
2 Within 20 seconds, use v / V to select the Time
Search icon in the on-screen display.
The "0:00:00" appears in the Time Search box.
3 Within 20 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec-
onds from left to right in the box.
You can not enter an invalid time.
If you enter the wrong numbers, press b / B to move the
under bar (_) to the wrong number. Then enter the correct
numbers.
4 Within 20 seconds, press ENTER to confirm the start
time.
Playback starts from the selected time on the disc.
VCD1.1
Video VR
31