Auto Chapter; Dv Rec Audio; Disc; Initialize - Zenith DVR313 Installation And Operating Manual

Before Operation (Continued)

Auto Chapter

When recording in Video mode, chapter markers are put
in every three minutes on the default setting. You can
change this interval to 3 minutes, 5 minutes or 10 min-
utes. If you select Not Use, switch off automatic chapter
marking altogether with the No Separation setting
Setup
Rec Mode Set
Rec Aspect
Language
Auto Chapter

DV Rec Audio

Audio
Lock
Recording

Disc

DV Rec Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
jack.
Some digital camcorders have two stereo tracks for
audio. One is recorded at the time of shooting; the other
is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
Setup
Rec Mode Set
Rec Aspect
Language
Auto Chapter
DV Rec Audio
Audio
Lock
Recording
Disc
Disc

Initialize

If you're recording on a DVD-R disc, the recording mode
will always be Video mode.
If you are using a DVD-RW disc, by default it will be VR
mode. You can change this to Video mode from the
Setup menu.
Setup
Initialize
Finalize
Language
Disc Name

Protection

Audio
Lock
Recording
Disc
1 1
2 2
3 3
4 4
5 5
Not Use
3 Min
5 Min
6 6
10 Min
Prev. Select
7 7
If you want to change the disc format, everything
recorded on the disc will be erased.
8 8
Audio 1
Audio 2
Protection
When recording in VR mode, set to ON to prevent acci-
dental recording, editing or erasing of the disc loaded. If
Prev. Select
you need to unlock the disc to make edits, select OFF.
Start
Prev. Select
Press SETUP.
The Setup menu appears.
Use v / V to select the Disc option.
While the Disc option is selected, press B to
move to the second level.
Use v / V to select the Initialize option.
Press B to move to the third level.
Start icon is highlighted.
Press ENTER.
Disc Initialize menu appears.
Disc Initialize
Select a Mode
Video Mode
VR Mode
Use b / B to select a desired Initialize Mode
(VR Mode or Video Mode) then press ENTER.
It takes a few moments to initialize the disc.
Caution
Press SETUP to exit the menu.
Setup
Initialize
Finalize
Language
Disc Name
Protection
Audio
Lock
Recording
Disc
OFF
ON
Prev. Select
25