Display; Tv Aspect; Display Mode; Progressive Scan - Zenith DVB412 Installation And Operating Manual

DISPLAY

DISPLAY

TV Aspect

Display Mode

Progressive Scan

DVD
TV Aspect
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 wide TV is connected.
DVD
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to "4:3".
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
DVD
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with
a progressive scan signal, set Progressive Scan to
On.
To Turn ON progressive scan:
Connect component out of the DVD to the input of
your monitor/television, set your television or monitor
to Component Input.
1. Select "Progressive Scan" on the DISPLAY menu
then press B.
DISPLAY
TV Aspect
Display Mode
Progressive Scan
Prev.
2. Select "On" using the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Notes:
At this point the only video displaying is Component
video. If your screen goes to a black screen, your
16 : 9
television/display may not be compatible to
Widescreen
progressive scan.
Off
In this case the player will time out after 10-12
seconds if no other keys are pressed. After the unit
times out, the player will automatically return to
standard format, and your picture will return.
Move Select
4. When the confirm menu appears on your screen
5. Pressing ENTER will set the player to Progressive
Caution:
Once the setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit. First,
remove the disc in the DVD Player. Next, press STOP
( x ) again and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be
visible on a conventional analog TV or monitor.
On
Off
Move Enter
Cancel is highlighted as default. Use the b / B
buttons to highlight Enter.
scan mode.
13