Cable Service With Vcr - Zenith HEALTHVIEW H20J55DT Installation Manual

Hook Up a Cable Box with VCR
Connect a cable box and VCR to the TV

Cable Service with VCR

1
Locate the In jacks on the cable box and the
VCR.
2 Connect a 75 ohm cable between the cable box
wall jack and Cable In on the cable box.
Connect a 75 ohm cable from the Cable out jack
3
on the cable box to the Ant In jack on the VCR.
Connect a 75 ohm cable between the VCR out
4
jack on the VCR and the Antenna/Cable In jack
on the TV.
5 Connect a 75 ohm wire to the Digital Antenna
input on the TV to get digital programming.
6
Make the other VCR-TV connections as indicated
in the illustration.
For cable service without a cable box, connect a
75 ohm cable between the cable wall jack and
the VCR In jack.
No A/V cables are
included with the TV.
206-4065
Cable Box
In
Out
Output
Switch 3 4
VCR Back AV Panel
In
Out
RF Coaxial Wire
(75 ohm)
Typ ica l
TV Bac k
Antenna
Cable
TV SPEAKER
M.P.I.
VIDEO IN SPEAKER OUT
Cable TV
Wall Jack
VCR Back
output
switch
3 4
Video Audio
A/V cables
not included
with TV
Page 11