Texas Instruments TI-83 Series Manual page 12

16
TI-83/84 Plus Graphing Calculators For Dummies, Portable Edition
Figure 1-4: Steps for using the Catalog.
press W because the letter T is written in green above
this key. This is illustrated in the second picture in
Figure 1-4.
4. Repeatedly press Ü to move the indicator to the
desired command or function.
5. Press Õ to select the command or function.
This is illustrated in the third picture in Figure 1-4.
After pressing Õ, the command or function is
inserted at the cursor location.
Press y )
Enter first letter Select item