HP 9000 Series Owner's Manual page 84

If your workstation doesn't have any printers connected, you will see a
message. Make sure you have a printer connected. Click on
.
4 5
Return
5. From the
on NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Add Local Printer/Plotter
6. Click on an appropriate selection on the sub-menu giving options for
Parallel, Serial, HP-IB, etc.
7. A window will give you information on available parallel or serial interfaces.
8. If you chose
one serial interface could be listed. The serial interfaces are listed in
ascending order. The lowest-numbered serial interface corresponds to the
lowest-numbered serial connector on your system. Choose the one to which
you have connected your printer.
5
9. Click on
NNNNNNNN
OK
The window opens for
10. Click on the box labeled
the new printer (entered in the blank earlier).
11. Click on
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Printer/Model Interface
12. Scroll down the next screen to nd the Model Name of your printer.
13. Click on the Model Name.
14. Click on NNNNNNNN
OK
5-4 Configuring HP-UX for Printers and Drives
NNNNNNNNNNNNNNNNNNNNNNN
menu (on the menu bar at the top of the window), click
Actions
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Add Serial (RS-232) Printer/Plotter
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Add Local Printer/Plotter
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Printer Name
.
NNNNNNNN
OK
, more than
.
printername for
and enter your
2/5/97 11:31
or press
DRAFT