Invacare 6895 Owner's Operator And Maintenance Manual page 31

WHEEL LOCKS
ADJUSTING THE WHEEL LOCKS (FIGURE 2)
1. Loosen the two (2) socket screws that secure the wheel lock assembly to the Rehab
Shower Commode chair frame.
NOTE: Any wheel lock adjustment should embed the wheel lock shoe at least 3/16-inch into the
tire when engaged.
2. Adjust the position of wheel lock until the 3/16-inch measurement is obtained for
correct wheel lock adjustment (FIGURE 2).
3. Securely tighten the two (2) socket screws.
4. Engage the wheel lock and push against the Rehab Shower Commode chair and
determine if the wheel lock engages the wheel lock shoe enough to hold the Rehab
Shower Commode chair.
5. Repeat the above sections until the wheel lock holds the Rehab Shower Commode chair.
6. Repeat section for opposite wheel lock
FIGURE 2 - ADJUSTING WHEEL LOCK
Part No. 1118394
Wheel lock shoe
embedded into rear
wheel tire at least
31
Rehab Shower Commode Chair
SECTION 11
Wheel Lock Handle
3/16-inch