Honeywell Enraf Operation Manual page 76

6-8
Electrical Schematics & Drawings
Process conditions when problems occurred (flow rate, viscosity,

product, temperature, number of prover runs)
Historic information about prover (date installed, repair history)

Pictures of damage

Honeywell Enraf can offer;
Commissioning & start-up (including replacement of the transit seals).

A periodic maintenance service which normally consists of changing

seals, checking alignment of drive end and changing optical
switches and a differential pressure test to check for seal leakage.
(Recommended annually)
Water draw is (Recommended every 2 years)

Small Volume Prover Inspection and Refurbishment

Project consultation

Honeywell GTS:
Email - HFS-TAC-Support@Honeywell.com
Call: 1-800-423-9883
SVP Controller Operation Manual Part No.: 44200004 - Revision 2