Adobe AUDITION 1.5 User Manual page 194

CHAPTER 7
186
Mixing Multitrack Sessions
To apply a real-time effect to a track:
From the Effects tab of the Organizer window, drag the effect to the track.
To change settings for a previously applied effect:
In the track controls, right-click FX, and choose FX Settings.
1
Click the tab for the effect, and change settings as desired.
2
To remove or reorder a real-time effect:
In the track controls, right-click FX, and choose Rack Setup.
1
2 Select the effect in the Current Effects Rack list, and then do one of the following:
• To remove the effect, click Remove.
• To reorder the effect, click either Move Up or Move Down.
To create or apply an effects group preset:
In the track controls, right-click FX, and choose Rack Setup.
1
Do one of the following:
2
To create a preset, click New, and type a name for the preset.
•
To apply a preset, choose it from the Preset menu, and click Apply.
•
Mixing real-time effects
In the FX mixer, you can change the ratio of dry to wet sound, bypass effects, and combine
effects as serial or parallel groups. By default, multiple effects are combined in serial
groups, in which the signal travels directly from the output of one effect to the input of the
next. In parallel groups, each effect independently receives the dry signal, and the effect
outputs are mixed at equal levels.
If the Organizer window is closed, right-click the FX button in the track controls, choose
Rack Setup, and add the effect in the Effects Rack dialog box.