Ec Declaration Of Conformity; Stihl Spa 65 Special Harvester; General Power Tool Safety Warnings; Introduction - Stihl SPA 65 Instruction Manual

22 EC Declaration of Conformity

► Dispose of the special harvester, battery, accessories and
packaging in accordance with local regulations and
environmental requirements.
22 EC Declaration of Conformity

22.1 STIHL SPA 65 Special Harvester

ANDREAS STIHL AG & Co. KG
Badstrasse 115
D-71336 Waiblingen
Germany
declare in exclusive responsibility that
– Category: Cordless special harvester
– Make: STIHL
– Model: SPA 65
– Serial identification: 4855
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and 2000/14/EC and
has been developed and manufactured in compliance with
the following standards in the versions valid on the date of
production: EN 55014-1, EN 55014-2 and EN 60745-1.
Technical documents are deposited at ANDREAS STIHL AG
& Co. KG Produktzulassung (Product Licensing).
The year of manufacture, country of manufacture and serial
number are applied to the special harvester.
Done at Waiblingen, 01.03.2017
ANDREAS STIHL AG & Co. KG
Thomas Elsner, Director Product Management and Services
0458-704-9921-C

23 General Power Tool Safety Warnings

23.1 Introduction

This chapter reproduces the pre-formulated, general safety
precautions specified in the IEC 62841 standard for hand-
held motor-operated electric tools.
STIHL is obliged to publish these texts.
The safety precautions and warnings on avoiding an electric
shock given under "Electrical Safety" do not apply to STIHL
cordless products.
WARNING
Read all the safety precautions, instructions, illustrations
and specifications accompanying this electric power tool.
Failure to follow the safety warnings and instructions may
result in electric shock, fire and/or serious injury. Save all
safety warnings and instructions for future reference.
The term "electric power tool" in the safety warnings refers
to mains-operated (corded) power tools or battery-operated
(cordless) power tools.

23.2 Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
English
45