Installation Instructions; Technical Specifications - Zanussi FLA 1001 W Instruction Booklet

Installation Instructions

It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Should the appliance power supply cable need to
be replaced, this should be carried out by our
Service Force Centre.

Technical Specifications

DIMENSIONS
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
WATER PRESSURE
MAXIMUM RECOMMENDED LOAD
SPIN SPEED
CONSUMPTION DATA FOR WASHING
4.5 KG NORMALLY SOILED COTTON
ITEMS AT 60°C (PROGR. C) WITH COLD
WATER FILLING
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
Height
Width
Depth
Minimum (hot)
Minimum
Maximum
Cotton, linen
Synthetics
Delicate fabrics
Wool
Maximum
Energy
Water
23
85 cm (33.5")
60 cm (23.6")
54 cm (21.1")
230-240 V/50 Hz
2050 W (10A)
2
0.35 bar (3.5 N/cm )
2
0.48 bar (4.8 N/cm )
2
7.6 bar (76 N/cm )
5 kg (11 lbs)
2 kg (4.5 lbs)
2 kg (4.5 lbs)
1 kg (2.2 lbs)
1000 rpm (FLA 1001 W)
1100 rpm (FLA 1101 W)
1200 rpm (FLA 1201 W)
1.03 kWh
54 litres