Zanussi FC 1200W Instruction Booklet page 9

Synthetics and Delicate (dry load weight: 1.5 kg)
Wool (dry load weight: 1.0 kg)
Load Degree of
type soiling
Normally
Synthetics
soiled
Lightly
Synthetics
soiled
Delicate Normally
fabrics soiled
Woollens Lightly
soiled
Spin
Drain
- Rinse-hold is an optional function available for the Synthetics, Delicate, and Wool programmes. To select
rinse-hold, press the option button on the machine control panel. Rinse-hold means that the programme halts and
the water from the last rinse is retained in the machine to minimise creasing in synthetic fibres.
Once the programme has stopped on rinse-hold, if you wish to end the wash with both emptying of water and
spinning of the load, press the option button again so it pops out.
If you wish to end the wash by emptying the water without spinning, you have to advance the programme control
knob manually, to programme setting L. Before you advance the programme control knob manually, we recommend
that you first press the On/Off button to switch the machine off (button pops out). Once the programme control knob
is set at L, press the On/Off button again (button remains in) to complete the programme.
The programme times are intended as a guide only. The actual time will vary depending on incoming water
pressure and temperature.
Progr. Temp.
selection setting
F 60
F 40
G 40
H 30
K
L
- 9 -
Progr. time Programme
(min.)
60° programme without
pre-wash.
~74
3 rinses and spin at
600 rpm.
40° programme without
pre-wash.
~74
3 rinses and spin at
600 rpm.
30°-40° programme
without pre-wash.
~56
3 rinses and spin at
600 rpm.
-40° programme
without pre-wash.
~50
3 rinses and spin at
600 rpm.
Emptying and spin at
~8
600 rpm.
~2
Draining
content