Kenwood DDX9020DABS Instruction Manual page 97

● Except Indonesia models / DDX9020DABS / DMX8520DABS / DDX8020S / DMX8020S
Connect to the vehicle's
parking brake detection switch
harness.
PRK SW
For best safety, be sure to
connect the parking sensor.
Pink (Speed Pulse Input) (2 m)
(DDX920WDABS only)
S SENS
Connect to the vehicle's speed pulse harness.
Do not cut the "S SENS" tag or failure may result.
Purple/White
(Reverse sensor wire) (2 m)
REVERSE
Connect to vehicle's reverse lamp harness when
using the optional rear view camera.
Pin Color and function
A1 Orange/White Dimmer
A2 Yellow
A4 Red
A5 Blue
[1]
A6 Black
A8/A7 White (+) / White/Black (–)
A10/A9 Gray (+) / Gray/Black (–)
B2/B1 Green (+) / Green/Black (–)
B6/B5 Purple (+) / Purple/Black (–) Rear Right
* Speaker Impedance: 4-8 Ω
Max. 300mA, 12V
[1]
Fuse (15A)
Light Green
(Parking sensor wire)
(2 m)
Battery
Ignition (ACC)
Antenna control
Earth (Ground) Connection
Front Left
Front Right
Rear Left
Accessory 1
If no connections are made, do not let
the cable come out from the tab.
Blue/White
(Power control wire)
When using the optional power amplifier, connect to
its power control terminal. (Max. 200mA, 12V)
Green/White
Green/Red
To CMOS-3xx series (optional accessory) camera control
terminal
Connect to vehicle's harness.
Connection/Installation
P. CONT
CAM–
CAM+
English
97