Kenwood DDX9020DABS Instruction Manual page 95

4) Rub the film antenna (accessory ~) gently
in the direction of the arrow shown below to
firmly stick it to the windscreen.
5) Remove the second sheet (tag 2) on the film
antenna (accessory ~) vertically.
6) Match the protrusions of the amplifier unit
(accessory !) with the T markings on the
film antenna (accessory ~) and attach the
amplifier.
Do not touch the lead terminal or the
adhesive side of the amplifier unit (-).
When installing the antenna on the right
side
~
!
Earth sheet
Lead terminal of the film
antenna (~)
Sheet (tag 2)
Match the protrusion
with the 5 mark
Lead contact of
the amplifier unit
(metal part)
When installing the antenna on the left
side
Earth sheet
7) Remove the film covering the earth sheet and
attach the earth sheet to the metal part of the
vehicle.
Provide sufficient space for the earth sheet
so that it does not obstruct the interior parts
(front pillar cover). Also take care that the
interior parts do not obstruct the amplifier
unit (accessory !).
!
8) Wire the antenna cables.
Use cord clamper (accessory -) to secure the
antenna cable to the pillar in several places.
9) Reattach the front pillar cover.
10) Be sure not to damage the earth sheet
and amplifier unit (accessory !) when
reattaching.
11) Connect the amplifier unit (accessory !) to
the DAB input terminal on the rear of the
unit.
12) Set [Antenna Power] to [ON]. (P.52)
Connection/Installation
~
!
Front glass
Front pillar
Font pillar cover
Earth sheet
English
95