LG GCW1069QD Owner's Manual page 35

Part 5 PROGRAMMING MODE -
1 1 8 8
Top spin speed – final spin time depends on RPM
Entering set up mode.
You will see LqC1
Note
Top spin speed
0: 1150rpm
1: 900 rpm
2: 800 rpm
If you select 800 or below, the final spin time will be reduced by 9minutes
If you select 1000 ,900 rpm , the final spin time is fixed by 13 minutes
Press the WHITES button.
Press the COLORS or the DELICATES
button until appears in the display.
Press the START button.
Press the COLORS or the DELICATES
button until appears in the display.
Press the START button.
Display previous top spin speed.
Press COLORS(+) or DELICATES(-) button to select top spin
speed. (0~4)
Press the START button.
The machine sets up the top spin speed, then advances to the
next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Close the service door.
• Card type - Pull the service card.
3: 600 rpm
4: 400 rpm
Setup Mode
Button Display
3 5