Zanussi CH 6029 GR Instruction Booklet
  1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Ventilation Hood
  5. CH 6029 GR
  6. Instruction booklet
Zanussi CH 6029 GR Instruction Booklet

Zanussi CH 6029 GR Instruction Booklet

Integrated cooker hood
Hide thumbs Also See for CH 6029 GR:
Table of Contents

Advertisement

Quick Links

INSTRUCTION BOOKLET
INTEGRATED
COOKER HOOD
CH 6029 GR

Advertisement

Table of Contents
loading

Related Manuals for Zanussi CH 6029 GR

Summary of Contents for Zanussi CH 6029 GR

  • Page 1 INSTRUCTION BOOKLET INTEGRATED COOKER HOOD CH 6029 GR...

  • Page 3: Important Safety Information

    • Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or more serious malfunction. Refer to your local Zanussi Service Force Centre. Always insist on genuine spare parts.

  • Page 4: Your Appliance

    The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. To obtain the best performance it is advisable to switch on the hood a few minutes before you start cooking and leave it running for approximately 15 minutes after finishing.
  • Page 5 The appliance can be installed to recirculate or extract contaminated air. The cooker hood is more effective when used in the extraction mode. Extraction In the extraction mode the contaminated air enters the cooker hood, passes through the grease filter and out through the ducting to the atmosphere.

  • Page 6: Maintenance And Cleaning

    MAINTENANCE AND CLEANING Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply. The cooker hood must be kept clean, as a build up of grease or fat can be a fire hazard The external surfaces of the hood should be cleaned regularly.

  • Page 7: Grease Filter

    Synthetic Grease Filter The grease filter has saturation indicators, which are small squares made from a series of dots. When the white paper inside the squares becomes saturated with grease the coloured dots start to run and spread across the paper, indicating that the filter has reached saturation point and must be replaced.

  • Page 10: Installation Instructions

    INSTALLATION INSTRUCTIONS It is dangerous to alter the specifications or attempt to modify this product in any way. Technical Information DIMENSIONS WEIGHT ELECTRICAL SUPPLY: POWER CONSUMPTION: FAN MOTOR: LAMP: SUITABLE FOR INSTALLATION ABOVE: Note: CE Marking certifies that this appliance complies with the require- ments laid down in EEC directive 89:336.

  • Page 11: Installing The Cooker Hood

    INSTALLING THE COOKER HOOD Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installations must comply with the local authorities requirements for the discharge of exhaust air. Incorrect installation may affect the safety of this cooker hood.
  • Page 12 A minimum clearance height of 650mm ”) is required when installed above a built-in electric hob, or 700mm (27 installed above a built-in gas hob. A minimum clearance height of 685mm (27”) is required when installed above a slot-in electric cooker, or 787mm (30 installed above a slot-in gas cooker.
  • Page 13 The hood is fixed using the holes located in the rim around the base of the casing visible when the inlet grille is in the open position. Support the grille panel with one hand and draw down on the two grey handles (A) which are located on each side of the grille with the other hand.
  • Page 14 Ducting The ducting used must be fire retardant 125mm (5”) in diameter. If possible duct through the wall at the rear of the canopy or wall cabinet. For the best performance use the shortest possible duct run and the minimum number of bends. Where flexible ducting is fitted it should not be turned through very tight bends as this may impair the performance of the hood.
  • Page 20 © Electrolux Household Appliances Limited 2000...

Table of Contents