Zanussi CH 250 Instruction Booklet
  1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Ventilation Hood
  5. CH 250
  6. Instruction booklet
Zanussi CH 250 Instruction Booklet

Zanussi CH 250 Instruction Booklet

Integrated cooker hood
Hide thumbs Also See for CH 250:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION BOOKLET
INTEGRATED
COOKER HOOD
CH 250

Advertisement

Table of Contents
loading

Related Manuals for Zanussi CH 250

Summary of Contents for Zanussi CH 250

  • Page 1 INSTRUCTION BOOKLET INTEGRATED COOKER HOOD CH 250...

  • Page 2: For The User

    If you require guidance in the use of the appliance or require further information on Zanussi Products, please contact our Customer Care Department. For general enquiries concerning your Zanussi appliance or for further information, visit our website at http:\\www.zanussi.co.uk...

  • Page 3: Important Safety Information

    It is dangerous to alter the specifications or modify inexperienced persons may cause injury or more this product in any way. serious malfunction. Refer to your local Zanussi Service Force Centre. Always insist on genuine spare • When installed between adjoining wall cabinets the parts.

  • Page 4: Your Appliance

    YOUR APPLIANCE OPERATING INSTRUCTIONS This cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. To obtain the best performance it is advisable to switch on the hood a few minutes before you start cooking and leave it running for approximately 15 minutes after finishing.
  • Page 5 The appliance can be installed to recirculate or extract contaminated air. The cooker hood is more effective when used in the extraction mode. Recirculation The cooker hood is supplied specified for use in the recirculation mode with the charcoal filter fitted. In the recirculation mode contaminated air is passed through the charcoal filter to be purified and recirculated into the kitchen...

  • Page 6: Maintenance And Cleaning

    MAINTENANCE AND CLEANING Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply. The cooker hood must be kept clean, a build up of grease or fat can be a fire hazard. External Cleaning Wipe the cooker hood frequently with warm soapy water using a mild detergent.

  • Page 7: Changing The Light Bulb

    Synthetic Paper Grease Filter The filter has saturation indicators, which are small squares made from a series of dots. When the white paper inside the squares becomes saturated with grease the coloured dots start to run and spread across the paper, indicating that the filter has reached saturation point and must be replaced.

  • Page 8: Something Not Working

    If you require an engineer or wish to purchase spare For general assistance with your appliance or for parts contact your local Service Force Centre by information on Zanussi products please contact our telephoning: Customer Care Department. Customer Care Department,...
  • Page 9 STANDARD GUARANTEE CONDITIONS We, Zanussi Ltd., undertake that if within twenty four months of the date of the purchase this Zanussi built-in appliance or any part there of is proved to be defective by reason only of faulty workmanship or materials, the...

  • Page 10: Installation Instructions

    INSTALLATION INSTRUCTIONS It is dangerous to alter the specifications or attempt to modify this product in any way. Technical Information DIMENSIONS HEIGHT: 15 cm WIDTH: 60 cm DEPTH: 48 cm WEIGHT GROSS: 8,5 kg NET: 7,4 kg ELECTRICAL SUPPLY: Voltage (50Hz) 220-240 V POWER CONSUMPTION: 190 W...

  • Page 11: Installing The Cooker Hood

    INSTALLING THE COOKER HOOD Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installations must comply with the local authorities requirements for the discharge of exhaust air. Incorrect installation may affect the safety of this cooker hood.

  • Page 12: Fitting The Wall Brackets

    Clearance Height A minimum clearance height of 650mm (25 ”) is required when installed above a built-in electric hob, or 700mm (27 ”) when installed above a built-in gas hob. A minimum clearance height of 685mm (27”) is required when installed above a slot-in electric oven, or 787mm ”) when installed above a slot-in gas oven.
  • Page 13 Venting The hood is more effective when used in the extraction setting (ducted to the outside). Venting kits maybe purchased through your retailer or DIY store, and must be ducted to an outside vent of 100mm (4”) minimum. The ducting used must be manufactured from fire retardant material which should conform to the relevant British Standard or DIN4102-B1.
  • Page 14 Wall Cabinet Fitting Before fitting the cooker hood beneath any type of wall cabinet ensure it is firmly fixed to the wall in accordance with the manufacturers instructions. Use the paper template provided to mark the hole positions on the underside of the cabinet. Ensure the front edges of the template are aligned with the front edge of the cabinet carcase.
  • Page 15 Turn the screws clockwise to lift the front edge of the hood and use a spirit level to check the hood is positioned at right angles to the wall before fitting the security system. The wall brackets have two studs and when the cooker hood is hung onto the brackets the studs project trought the holes above the levelling screws.
  • Page 16 © Electrolux Household Appliances Limited 2000 4324165 02 - 230300...

Table of Contents