Page 2
Overview Strap release button Home button Heart rate sensors Multifunction button Charging port Strap release button ※ Wear your watch one finger above your wrist bone (towards your elbow) with its back touching your skin so that the sensors can collect heart rate data.
Home button Multifunction button • Press to go to the Home screen or watch face. • Power on: Press and hold for 2 s until the OPPO logo appears. • Press and hold for 1.5 s to wake Google Assistant.
Page 4
20–35°C and a proper adapter is used. > Touch and hold: ⎓ Adapter for OPPO Watch 46mm: rated output of 5V 1.5A or above. Edit a watch face. ※ Make sure the charging port is clean and dry before charging your watch...
Page 5
Go to the Manage tab and tap the Add button. On the the onscreen instructions to complete pairing. page displayed, tap "OPPO Watch" and then tap the ※ Charge your watch to at least 20% to ensure you have enough device you would like to add.
Activate eSIM Change the watch strap Open the HeyTap Health app and go to "Manage > More > Hold down the strap release button and pull out the strap. eSIM and mobile network". Alternatively, open the Wear OS Insert the new strap into the slot. Then, gently pull the new by Google app and follow the onscreen instructions to strap into place.
Frequency Max. output power For the most recent information about accessories and WCDMA Bands 1/8 23±2.7 dBm software, please see the Declaration of Conformity (DoC) at www.oppo.com/en/certification. LTE FDD Bands 1/3/7/8/20 23±2.7 dBm LTE TDD Bands 38/41 23±2.7 dBm The N-Mark is a trademark or registered trademark Bluetooth 2400-2483.5 MHz...