Advertisement
Quick Links
Maintaining the CL-X
CAUTION: WHEN REMOVING THE DISPLAY MAKE SURE THE HEAD IS
LOCKED IN THE NEGATIVE TILT POSITION, OTHERWISE INJURY COULD
OCCUR.
The arm assembly and wall plate may be cleaned with a soft sponge and mild solution of soap and water.
Caution: Be careful not to get water on the electrical connections or the display.
If the Roll Control mechanism becomes loose, use a 10 mm open ended wrench to
tighten the lock nuts on the back of the Mounting Head. Do not overt-tighten, or the
roll control will no longer function. See Fig 20 for lock nut locations.
Fig. 21
Thank you for purchasing an OmniMount product.
Specifications are subject to change without prior notice.
Every effort has been made to provide accurate and error-free assembly and installation. OmniMount Systems disclaims liability for any diffi-
culties arising from the interpretation of information contained in these instructions. If OmniMount products are used for purposes other than
their original intent, OmniMount, its distributors and retailers shall not be held responsible or liable for injuries or property damage, direct,
indirect, or consequential, which may arise from the inability to use this product safely, properly, and in the manner for which it has been de-
signed and manufactured. Warranty does not apply to products which have been lost, damaged by misuse, abuse, or accident.
OmniMount Systems, Inc.
8201 South 48th Street • Phoenix, AZ 85044-5355
1-800-MOUNT-IT • www.omnimount.com
8
Negative Tilt
Fig. 20
If the Arm Assembly becomes loose and won't
maintain it's position, you can tighten the Arms
at several points. Use the 5 mm (7b) Hex
Wrench as indicated in Fig. 21.
PN:1002783—Rev B 7/2005
Installation Instructions
Wishbone Series™
CL-X: Extra-Large Cantilever Mount*
Designed for 42" - 63" Flat Panel TV's
•
Maximum Weight Capacity: 200 lbs. (91 Kg)
•
Heavy Duty Double Arm Design
•
Installation Template Included
•
Integrated Cable management
•
Lift N' Lock Installation
•
*Mount Only—Additional Adapter Plate Required
Questions? Call 1-800-MOUNT-IT (USA only)
Advertisement
Related Manuals for Omnimount Wishbone Series
Summary of Contents for Omnimount Wishbone Series
- Page 1 • their original intent, OmniMount, its distributors and retailers shall not be held responsible or liable for injuries or property damage, direct, indirect, or consequential, which may arise from the inability to use this product safely, properly, and in the manner for which it has been de- *Mount Only—Additional Adapter Plate Required...
- Page 2 Raising or lowering the screen to improve view- Fig. 12 • ing angle/picture quality. Do not begin the installation of your OmniMount product until you have thoroughly reviewed this document Fig. 13 and understand the instructions. Adjust Tilt Lever (12.1) until the display will not move forward without manual adjustment, yet can still be •...
- Page 3 To provide maximum viewing flexibility, the OmniMount Wishbone Series cantilever mounts are capable of a wide range The Wishbone series cantilevers include a cable management function, where cables can be routed along the length of the of motion, which allows the flat panel display to be positioned for viewing from many different angles.
- Page 4 Step 3b — Mounting to Concrete/Masonry Fig. 3 Step 4 — Mounting to the Wall Fig. 4 Remove the cantilever assembly from the box. WARNING • NEVER drill into mortar joints! If you have installed electrical boxes into the wall, you will need to remove the Cover Panels from •...