Factory Reset; Tuner; Metronome - Boss GT-1000CORE Parameter Manual

FACTORY RESET

Initializes the GT-1000CORE to its factory-set condition.
Parameter Value
SYSTEM
FROM, TO
U001–U250
STOMPBOX

TUNER

Here you can make settings for the TUNER.
Parameter Value
MODE (TUNER
NORMAL, STREAM
MODE)
435–445 Hz (default:
PITCH
440 Hz)
MUTE
BYPASS
OUTPUT
THRU
6-REG (6-REGULAR),
6-DROP D,
7-REG (7-REGULAR),
TYPE
7-DROP A,
4-B REG (4-B REGULAR),
5-B REG (5-B REGULAR)
OFFSET
-5–-1, ---

METRONOME

Here you can make settings for the METRONOME.
* You can select the output destination of the metronome sound.
* By pressing knob 1 you can set the metronome's BPM to the master
BPM value.
Parameter Value
BPM
20–250
1/1–8/1, 1/2–8/2,
BEAT
1/4–8/4, 1/8–8/8
OFF/ON OFF, ON
LEVEL
0–100
Explanation
System parameter settings
Settings for Patch Numbers
U001–U250
Settings for STOMPBOX
Explanation
Specifies the meter display method for
the monophonic tuner.
Specifies the reference pitch.
Sound will not be output while tuning.
While tuning, the sound of the guitar
being input to the GT-1000CORE will
be output without change. All effects
will be off.
Allows you to tune while hearing the
current effect sound.
* Only for monophonic tuner.
Selects the type of tuning for the
polyphonic tuner.
Adjusts the reference pitch of the
polyphonic tuner in semitone units
relative to standard tuning.
Explanation
Specifies the tempo.
Selects the time signature.
Turns the metronome on/off.
Adjusts the volume of the metronome sound.
MENU
55