Switching On The Rear View Camera System; Switching Off The Rear View Camera System; Functions And Symbols Of The Rear View Camera System; Orientation Lines - Volkswagen T-Roc Manual

Table of Contents

Advertisement

Switching on and off
First read and observe the introductoryinformation and safety warnings⇒

Switching on the rear view camera system

Select reverse gear.
OR: press the
button.

Switching off the rear view camera system

Drive forwards at a speed of at least 10 km/h (6 mph).
Display representation
First read and observe the introductoryinformation and safety warnings⇒
The functions and displays of the rear view camera system image vary according to the equipment
level and may differ from each other.
The display of the reversing camera picture varies if the factory-fitted towing bracket is electrically
connected to the trailer ⇒ Notes on towing a trailer .

Functions and symbols of the rear view camera system

You can make settings by means of the function buttons when the rear view camera system is
switched on. Some setting options depend on the vehicle equipment.
xClose current display.
Distance Control ⇒ Park Distance Control . Show Park Distance Control display. Hide Park
Distance Control display.

Orientation lines

Red line: safety distance to the rear.
Green lateral lines: extension of the vehicle.
Prerequisites
First read and observe the introductoryinformation and safety warnings⇒
The prerequisites for parking using the rear view camera system must be met.
Do not exceed a speed of approximately 15 km/h (9 mph).
Width of the parking space: vehicle width + 0.2 m.
The following conditions must be met in order to display a correct image:
The boot lid is closed.
The surrounding area has a flat surface.
Vehicle does not have a heavy load at the rear.
Adjust display: brightness, contrast, colour.
Introduction 
Introduction 
Switch to Park
Introduction 

Advertisement

Table of Contents
loading

Table of Contents