Vehicles With Reversing Camera System: Check Number Plate; Vehicle System Test: Perform Test - Volkswagen Touareg 2003 Service Manual

4.20 Vehicles with reversing camera system:
Check number plate
Note
For vehicles with reversing camera system it is not permitted to
install an additional number plate bracket or an additional number
plate mounting. Additional information see ⇒ Electrical system ⇒
Rep. gr. 94 ⇒ Reversing camera system/General notes
4.21

Vehicle system test: Perform test

– Connect vehicle diagnosis tester
– Switch on ignition.
– Select operating mode „Guided fault finding" on display.
– Then perform vehicle identification on vehicle diagnosis test‐
er .
The programme now automatically performs a vehicle system test
and reads all control units available for this vehicle type.
– Press button.
>
Now all faults are listed.
Note
At this point it is useful to change to operating mode guided
♦
functions to carry out further operations with vehicle diagnosis
tester and to prevent a second vehicle identification on vehicle
diagnosis tester .
To do this, press button operating mode and then guided func‐
♦
tions.
For further procedure see respective work descriptions.
♦
To return to guided fault finding, press button operating mode
♦
and then guided fault finding.
Caution
The vehicle must always be delivered to the customer with
event memory cleared.
Static faults
If one or more static faults are found in the fault memory, we rec‐
ommend in agreement with the customer to rectify these faults
using guided fault finding.
Sporadic faults
If only sporadic faults or notes are stored in the event memory
and the customer has no complaints regarding the electronic ve‐
hicle system, erase event memory.
– Press button again to reach the test plan.
>
– Now finish guided fault finding using GoTo button and then
End.
All event memories are read again.
⇒ page 19 .
Touareg 2003 ➤
Maintenance - Edition 11.2011
4. Descriptions of work
69