Brother 888-N00 Operation Manual
Hide thumbs Also See for 888-N00:
Table of Contents

Advertisement

Operation Manual
Sewing Machine
Product Code: 888-N00/N02/N20/N22/N40/N42
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ����������������������2
Names of Machine Parts ��������������������������������������������4
Main parts ����������������������������������������������������������������������� 4
Needle and presser foot section �������������������������������������� 4
Operation buttons ����������������������������������������������������������� 4
Flat bed attachment ��������������������������������������������������������� 4
Accessories ����������������������������������������������������������������5
Included accessories ������������������������������������������������������� 5
Optional accessories ������������������������������������������������������ 5
Using Your Machine ��������������������������������������������������5
Power supply ������������������������������������������������������������������ 6
Foot controller ����������������������������������������������������������������� 6
Operation panel �������������������������������������������������������������� 6
Settings/Functions ����������������������������������������������������������� 6
Be sure to read this document before using the machine.
We recommend that you keep this document nearby for future reference.
Threading the Machine ����������������������������������������������7
Winding/Installing the bobbin ����������������������������������������� 7
Upper threading �������������������������������������������������������������� 9
Drawing up the bobbin thread �������������������������������������� 11
Fabric/Thread/Needle Combination ������������������������12
Needle ���������������������������������������������������������������������13
Checking the needle ����������������������������������������������������� 13
Replacing the needle ����������������������������������������������������� 13
Sewing with the twin needle ����������������������������������������� 13
Replacing the Presser Foot ���������������������������������������14
Replacing the presser foot ��������������������������������������������� 14
Removing the presser foot holder ���������������������������������� 15
Sewing Basics�����������������������������������������������������������15
Selecting the stitch �������������������������������������������������������� 15
Setting the stitch length and stitch width ����������������������� 15
Starting to sew ��������������������������������������������������������������� 16
Sewing reverse/reinforcement stitches ��������������������������� 16
Automatic reverse/reinforcement stitching ��������������������� 17
Thread tension �������������������������������������������������������������� 17
Utility Stitches ���������������������������������������������������������17
Overcasting stitches ������������������������������������������������������ 17
Blind hem stitching �������������������������������������������������������� 18
Buttonhole sewing �������������������������������������������������������� 19
Button sewing (for models equipped with
Zipper insertion������������������������������������������������������������� 22
Bar tack stitching ����������������������������������������������������������� 23
Making Adjustment��������������������������������������������������23
(Downloading Manuals) ������������������������������������������24
Care and Maintenance ���������������������������������������������24
Restrictions on oiling ����������������������������������������������������� 24
Precautions on storing the machine ������������������������������� 24
Cleaning the machine surface ��������������������������������������� 24
Cleaning the race ���������������������������������������������������������� 24
Frequent troubleshooting topics ������������������������������������ 25
Upper thread tightened up �������������������������������������������� 25
Tangled thread on wrong side of fabric ������������������������� 25
Incorrect thread tension ������������������������������������������������ 26
removed ������������������������������������������������������������������������ 26
winder seat�������������������������������������������������������������������� 28
List of symptoms������������������������������������������������������������ 28
Error Messages ���������������������������������������������������������30

Advertisement

Table of Contents
loading

Summary of Contents for Brother 888-N00

  • Page 1: Table Of Contents

    Operation Manual Sewing Machine Product Code: 888-N00/N02/N20/N22/N40/N42 Threading the Machine ����������������������������������������������7 Winding/Installing the bobbin ����������������������������������������� 7 Upper threading �������������������������������������������������������������� 9 Drawing up the bobbin thread �������������������������������������� 11 Fabric/Thread/Needle Combination ������������������������12 Needle ���������������������������������������������������������������������13 Checking the needle ����������������������������������������������������� 13 Replacing the needle ����������������������������������������������������� 13 Sewing with the twin needle �����������������������������������������...
  • Page 2: Important Safety Instructions

    • The plastic bag that this machine was supplied unit� Return the machine to the nearest authorized in should be kept out of the reach of children or Brother dealer for examination, repair, electrical or disposed of� Never allow children to play with the mechanical adjustment�...
  • Page 3 • Always replace the fuse cover� Never use plugs with the fuse cover omitted� • If the available electrical outlet is not suitable for the plug supplied with this equipment, you should contact your authorized Brother dealer to obtain the correct lead�...
  • Page 4: Names Of Machine Parts ��������������������������������������������4 Troubleshooting

    1 Needle threader (page 10) ★ Names of Machine Parts 2 Buttonhole lever (page 20) ★ 3 Presser foot holder (page 15) 4 Presser foot holder screw (page 15) Main parts 5 Presser foot The presser foot applies pressure consistently on the fabric as the sewing takes place�...
  • Page 5: Included Accessories

    If the plug does not fit fully in the electrical available, contact your authorized Brother dealer outlet, reverse the plug� If it still does not fit, or visit our site http://s�brother/cpkag/� Always use contact a qualified electrician to install the accessories recommended for this machine�...
  • Page 6: Power Supply

    Foot controller: Model T This foot controller can be used on the machine 1 Changing the needle stop position with product code 888-N00/N02/N20/N22/ You can change the needle stop position to either N40/N42� The product code is mentioned on the machine rating plate�...
  • Page 7: Threading The Machine

    2 Changing the initial needle position 6 Changing the needle mode You can change the stitch selected when the You can change the needle mode to either the single or twin needle mode� machine is turned on to either “straight stitch (Default: Single needle mode) (left needle position)”...
  • Page 8 Pass the thread under the thread guide and Stop the machine and trim the excess thread� around the pretension disk, front to back� Release� ★ Pretension disk Slide the sewing speed controller to adjust the bobbin winding speed� ★ ★ Passing the thread through a hole on the bobbin, Slower Faster...
  • Page 9: Upper Threading

    Put the bobbin in, hold the end of the thread, n For models equipped with the cutter ★ push the bobbin down with your finger, and then pass the thread though the slit as shown� Follow steps of “Winding/Installing the bobbin”�...
  • Page 10 Raise the needle to its highest position� n Using the needle threader ★ ★ CAUTION • The needle threader can only be used with Press once or twice� home sewing machine needles size 75/11- Turn toward you so that this mark 100/16�...
  • Page 11: Drawing Up The Bobbin Thread

    b) While lowering the needle threader lever Lightly hold the end of the upper thread� fully (1), hook the thread onto the guide Upper thread (2)� Next, push back the needle threader lever until it stops (3), and pass the thread in front of the needle�...
  • Page 12: Fabric/Thread/Needle Combination

    • Select a stitch appropriate for the fabric, and then adjust the stitch length� When sewing lightweight fabrics, make the stitch length finer (shorter)� When sewing heavyweight fabrics, make the stitch length coarser (longer)� (page 15) When sewing stretch fabrics, refer to “Sewing guide” (http://s�brother/cmkag/)� Thread Stitch length...
  • Page 13: Needle

    For details on the stitches that can be sewn with the CAUTION twin needle, refer to “Stitch chart” (http://s�brother/cmkag/)� * The twin needle and the extra spool pin are sold separately • Before replacing the needle, be sure to turn with some models�...
  • Page 14: Replacing The Presser Foot

    Turn the machine into the twin needle mode� CAUTION (page 7) Select a stitch and start sewing� • When using the twin needle, be sure to select * If you select an inappropriate stitch with the an appropriate stitch, otherwise the needle twin needle, an error message appears�...
  • Page 15: Removing The Presser Foot Holder

    Place another foot so that the groove and pin Selecting the stitch align� Press the stitch selection keys to change the stitch number� Selected stitch Presser foot that should be used Groove Stitch selection keys Note 1 Changes the tens digit of the •...
  • Page 16: Starting To Sew

    Start sewing� CAUTION * Guide the fabric lightly by hand� Depress� ★ • After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot� If the needle hits the presser foot, the needle may bend or Stop sewing�...
  • Page 17: Automatic Reverse/Reinforcement Stitching

    The machine will sew reverse stitches (or reinforcement stitches) and stop� You can see the “Stitch chart” from Thread tension “ http://s�brother/cmkag/ ”� The thread tension will affect the quality of your Overcasting stitches stitches� You may need to adjust it when you change fabric or thread�...
  • Page 18: Blind Hem Stitching

    Turn the skirt or pants inside out� CAUTION 1 Wrong side of fabric 2 Right side of fabric 3 Lower edge of fabric • When using overcasting foot “G”, be sure to select a stitch that can be used with Fold the lower edge of fabric to the desired length overcasting foot “G”�...
  • Page 19: Buttonhole Sewing

    Attach blind stitch foot “R”� Stop sewing when you are finished, and raise the presser foot and needle to pull the fabric under the presser foot towards the back of the machine� Note Select a stitch� • Be sure to pull the fabric towards the back of * Stitches may differ depending on the model�...
  • Page 20 Note Use chalk to mark on the fabric the position and length of the buttonhole� • When lowering the presser foot, do not push in the front of the presser foot, otherwise the bar Marks on fabric tack will not be sewn with the correct size� Buttonhole sewing Pull down the buttonhole lever as far as possible�...
  • Page 21: Button Sewing

    Measure the distance between the When using the eyelet punch, place thick paper or some other protective sheet under the holes in the button to be attached� fabric before punching the hole in the fabric� Raise the presser foot lever� CAUTION Slide the feed dog position switch, located at the rear of the machine on the base, to...
  • Page 22: Zipper Insertion

    Baste the fabric from the zipper opening to the CAUTION edge of the fabric� 1 Basting stitching • When sewing, be sure that the needle does 2 Wrong side of fabric not touch the button, otherwise the needle may bend or break� Sew about 10 stitches at a slow speed�...
  • Page 23: Bar Tack Stitching

    Topstitch around the zipper� Position the fabric so that the opening of the pocket 1 Stitching faces toward you, and then 2 Right side of fabric lower the presser foot lever 3 Basting stitching 4 End of zipper so that the needle drops 2 opening mm (1/16 inch) in front of the pocket opening�...
  • Page 24: Brother Support Website Information

    Information (Downloading Manuals) Cleaning the race Sewing performance will suffer if dust collects in the Brother support website introduces a variety of information about the product, such as sewing tips, bobbin case� how to use optional accessories, and details on stitch CAUTION patterns�...
  • Page 25: Frequent Troubleshooting Topics

    FAQs and troubleshooting tips� Visit us at “ http:// • The thread becomes s�brother/cpkag/ ” � tangled on the wrong If the problem persists, contact your Brother dealer or side of the fabric� the nearest Brother authorized service center� Frequent troubleshooting topics •...
  • Page 26: Incorrect Thread Tension

    “Winding/Installing the bobbin” (page the procedure, instead of attempting to remove it 7) to correct the threading� forcefully, contact your nearest Brother authorized <With symptoms 3 through 5 described above> service center� The upper threading is incorrect�...
  • Page 27 Turn off the machine� completing these steps, contact your nearest Remove the needle� Brother authorized service center� If the needle is lowered into the fabric, turn the Insert the bobbin case by following step handwheel away from you (clockwise) to raise “Cleaning the race”...
  • Page 28: Winder Seat

    If the reference page is “ ”, contact your authorized and "Replacing the presser foot" (page 14)� Brother dealer or the nearest Brother authorized Correctly thread the machine� service center� * For details on threading the machine, refer to "Upper threading"...
  • Page 29 Symptom, Cause/solution Reference Symptom, Cause/solution Reference The needle is not appropriate for the thread The needle is turned, bent or the point is dull� you are using� The needle is not installed properly� The upper thread tension is too tight� Dust has accumulated under the needle plate The thread is tangled, for example, in the or in the bobbin case�...
  • Page 30: Error Messages

    Brother dealer or the nearest Brother authorized service center� The handwheel does not turn smoothly� Operation beep ★ Thread is tangled in the bobbin case�...
  • Page 31 Index accessories ����������������������������������������������������������������������������������5 presser foot ���������������������������������������������������������������������������4, 14 automatic reverse/reinforcement stitching ����������������������������� 7, 17 presser foot holder ����������������������������������������������������������������4, 15 presser foot lever ��������������������������������������������������������� 4, 8, 14, 16 pretension disk ����������������������������������������������������������������������8, 28 bobbin ����������������������������������������������������������������������������������������7 bobbin case ������������������������������������������������������������������������������24 bobbin cover ���������������������������������������������������������������������������4, 8 quick-set bobbin ���������������������������������������������������������������������4, 9 bobbin installation ����������������������������������������������������������������������7 quilting foot ���������������������������������������������������������������������������5, 15 bobbin winder ����������������������������������������������������������������������4, 28...
  • Page 32 Please visit us at http://s.brother/cpkag/ where you can get the support information (Sewing Guide, Stitch Chart, Instruction Videos, FAQs, etc.) for your Brother product. To get information about Videos, please go to http://s.brother/cvkag/. Brother SupportCenter is a mobile app that provides the support information (Instruction Videos, FAQs, etc.) for your Brother product.

This manual is also suitable for:

888-n02888-n20888-n22888-n40888-n42

Table of Contents