General Information - Electrolux SKYLINE OVEN 6-10-20GN Service Manual

ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN
2018
SOFTWARE UP TO 1.0.11 ......................................................................................................... 94
5 ELECTRICAL WIRING DIAGRAM ............................................................................................................ 96
5.1 GAS APPLIANCE ............................................................................................................................... 96
5.2 ELECTRIC APPLIANCE ................................................................................................................... 100
1

GENERAL INFORMATION

1.1 GENERAL INFORMATION
To ensure safe use of the machine and a proper understanding of the manual it is necessary to be familiar
with the terms and typographical conventions used in the documentation. The following symbols are used in
the manual to indicate and identify the various types of hazards:
WARNING
Danger for the health and safety of operators.
WARNING
Danger of electrocution - dangerous voltage.
CAUTION
Risk of damage to the machine or the product.
WARNING
Danger of magnetic fields.
IMPORTANT
Important instructions or information on the product
Read the instructions before using the appliance
Clarifications and explanations
• Only specialised personnel are authorised to operate on the machine.
•
This appliance must not be used by minors and adults with limited physical, sensory or mental
abilities or without adequate experience and knowledge regarding its use.
–
Do not let children play with the appliance.
–
Keep all packaging and detergents away from children.
–
Cleaning and user maintenance shall not be made by children without supervision.
•
Do not store explosive substances, such as pressurized containers with flammable propellant, in
this appliance or close to the appliance
• Do not remove, tamper with or make the machine "CE" marking illegible.
• Refer to the data given on the machine's data plate "CE" marking for relations with the Manufacturer
(e.g. when ordering spare parts, etc.).
• When scrapping the machine, the "CE" marking must be destroyed.
7