Fiat 124 Spider 2019 Owner's Manual page 247

3. Tilt the blade assembly and remove
it from the arm.
07031101-36A-002
Blade Assembly and Arm
Warning!
To prevent damage to the windshield let
the wiper arm down easily, do not let it slap
down on the windshield.
4. Pull down the blade rubber and slide
it out of blade holder.
07031101-36A-003
Blade Holder
5. Remove the metal stiffeners from
each blade rubber and install them in
the new blade.
07031101-36A-004
Metal Stiffeners
Note:
Do not bend or discard the
stiffeners, they will be reused.
If the metal stiffeners are switched,
the blade's wiping efficiency could be
reduced. Do not use the driver's side
metal stiffeners on the passenger's
side, or vice versa.
Be sure to reinstall the metal
stiffeners in the new blade rubber so
that the curve is the same as it was in
the old blade rubber.
6. Carefully insert the new blade
rubber. Then install the blade assembly
in the reverse order of removal.
07031101-36A-005
Reassemble Blade
245