Fiat 124 Spider 2019 Owner's Manual page 223

Note: Store the valve core in a place
where it will not get dirty.
10. Insert the injection hose into the
valve.
08020202-03A-005
Injection Hose Into Valve
11. Hold the bottom of the bottle
upright, squeeze the bottle with your
hands, and inject the entire amount of
tire sealant into the tire.
08020202-03A-008
Squeeze Sealant Into Tire
12. Pull out the injection hose from the
valve.
08020202-03A-007
Turn Valve Core Clockwise To
Reinstall
13. Reinsert the valve core into the
valve and turn it clockwise to install.
Note:
The tire sealant cannot be reused.
If the tire sealant kit has been used, or
is expired, purchase a new one at an
authorized dealer.
Do not throw away the empty tire
sealant bottle after use. Return the
empty tire sealant bottle to an
authorized dealer when replacing the
tire. The empty tire sealant bottle will
need to be used to extract and
dispose of the used sealant from the
tire.
14. Install the injection hose to the tab
of the bottle to prevent leakage of any
remaining sealant.
15. Adhere the speed restriction sticker
to an area where it can be viewed easily
by the driver.
Warning!
Do not adhere the speed restriction sticker
to the padded area on the steering wheel.
Adhering the speed restriction sticker to
the padded area on the steering wheel is
dangerous because the air bag may not
operate (deploy) normally resulting in
serious injury. In addition, do not adhere
the sticker to areas where warning lights or
the speedometer cannot be viewed.
16. Pull out the air compressor hose
and the air compressor plug from the
air compressor.
08020202-36A-004
Air Compressor With Hose And
Plug
2 — Air Compressor Hose
17. Install the air compressor hose to
the tire valve.
221