Bowers & Wilkins ASW 500 Owner's Manual page 26

Description
Drive units
System frequency response
Low-Pass Filter
High-Pass Filter
Internal Volume
Dimensions
Net Weight
B&W Loudspeakers Ltd. reserves the right to amend details of the specification without notice in line with technical developments.
B&W Loudspeakers Ltd, Meadow Road, Worthing, BN11 2RX Tel: +44 (0) 1903 524801 Fax: +44 (0) 1903 524725
ASW ™ 500
Active vented-box subwoofer system
One 250mm (10in) dia long-throw with pressed fibre
cone and magnetic shielding
-3dB at 32Hz and 80Hz
Amplifier Discrete MOSFET
Power output:
Input Impedance:
Signal/Noise:
Functions:
Inputs:
Outputs:
Active 2nd-order at 80Hz
Line Level:
Speaker Level:
35 litres (1.24 cu ft)
Height:
Width:
Depth:
12kg (26.5lb)
Finish Cabinet:
Grille:
Copyright © B&W Loudspeakers Ltd. Printed in England.
http://www.bwspeakers.com
70W continuous
22k
96dB
Input Level
Phase 0º/180º
Line In (RCA Phono)
Speaker Level In (Spring Terminals)
Line Out (RCA Phono)
Link Out (RCA Phono)
Speaker Level Out (Spring Terminals)
Passive 1st-order at 80Hz (47k
Passive 1st-order at 80Hz into 8
(Response of passive filters
dependent on load impedance)
415mm (16.3 in)
353mm (13.9 in)
401mm (15.8 in)
Black Ash vinyl
Black
load)
resistor