Serial Port - IBM PS/2 N51 SX HMR Manual

1.2.8 Serial Port

The serial port is fully programmable and is capable of asynchronous
communications at a maximum speed of 19.2 kb/s.
connector provides the signals to drive a standard EIA-232D device.
connected device is identified by the system configuration as either
SERIAL_1 or SERIAL_2.
adapter is installed, the device address must be different from the
primary one.
Note: Conflicts occur when two or more devices have the same address.
Use the 4. Set configuration option from the system utility
programs stored on the hard disk.
verify that no two ports have the same address.
IBM PS/2 Model N51 SX HMR
Serial Port
If an optional communication slot with a serial
Select 1. View configuration to
¦ Copyright IBM Corp. 1991
1.2.8 - 1
The 9-pin D-shell
The