Remote Control - PSB ALPHA AM5 Owner's Manual

Remote Control

Subwoofer ON/OFF
Place the two AAA batteries supplied into the remote control. Be careful to ensure that it is correctly inserted according to the
polarity (+/-). You should only use the battery specified for this system. Caution: When replacing the batteries, ensure that you only use
standard AAA batteries which are not re chargeable. The use of an incorrect type of battery may cause severe damage to the remote or
risk explosion.
1. ON/Off: Speakers from standby mode to operating mode. The LED on the front will indicate the color of the source last chosen.
2. Volume Control +/-: Increase or decrease audio level. Release mute function.
3. Input Selection: Toggle and select source. The LED on the front of the left speaker will change color, based on the active source:
4. Mute: Temporarily mute audio output or restore audio output from mute.
5. Listening Mode Selection: Press the "MODE" button on the remote control once to activate the display and cycle through the four
listening modes.
Mode
Stereo
Widesound
Dialogue
WideSound™ Plus
6. Subwoofer On/Off: Subwoofer output can be activated using the supplied remote control, which will also redirect part of the low
frequency content to the subwoofer.
Power On/Off
Volume Control
Input Selection
Treble Control
Analog: Cyan
Phono: Green
USB: Purple
Optical: White
Bluetooth: Blue
Effect
Normal
Expanded Soundstage
Enhanced Dialogue Clarity
Expanded Soundstage with Enhanced Dialogue Clarity
SUB MODE
TREBLE BASS
Bluetooth Interrupt
Mute
Input Selection
Sound Mode Selection
Bass Control
Color
No Color
Green
Amber
Blue