Texas Instruments TI-Nspire CX II Series Handhelds Manualbook page 96

Shown
Message and Description
on:
This message is displayed when an OS Upgrade is about to begin. If you do not
select Yes within 30 seconds, the system automatically responds with No.
Receiving
handheld
This message, along with a progress bar, is displayed while the OS Upgrade is
being transferred.
Receiving
handheld
This message is displayed when the transfer is complete. It is shown to keep
you informed of the handheld's status.
Receiving
handheld
This information message displays briefly before the handheld automatically
reboots.
Receiving
"Install was corrupted. Handheld will reboot. You will need
handheld
An error occurred during the transmission and the installation was corrupted.
The handheld will reboot. After the reboot, reinstall the OS Upgrade.
90 Updating the Handheld Operating System
"Receiving OS. Do not unplug cable."
"OS has been installed. Handheld will restart."
to retry OS upgrade."
"Installing OS."
OK
OK