Setting up the machine
Carrying case
6
Accessory box
Carrying case
· protects machine from dust and dirt
· compartment for accessories
Accessories
· foot control
· instruction manual
· power cable
· warranty card
· presser foot lifter (FHS)
· sewing table (attached)
·
To remove the sewing table, lift slightly and remove.
To remove the case
· grasp both sides
· pull off vertically
Note:
The separate spool pin must be removed
to put the case on.
Standard accessories*:
5 bobbins
•
Needle selection 130/705H
•
Seam ripper
•
Small screwdriver
•
Special screwdriver
•
Brush
•
Seam guide
•
Reverse feed foot No.1
•
Overlook foot No. 2*
•
Buttonhole foot No. 3
•
Buttonhole foot with slide No. 3A
•
Zipper foot No. 4
•
Blind stitch foot No. 5
•
Jeans foot No. 8**
•
Darning foot No. 9*
•
Open embroidery foot No. 20*
•
Quilt foot No. 29*
•
Patchwork foot No. 37***
•
Height compensating plates
•
Supplementary spool pin
•
3 spool discs
•
* can vary from country to country
** Available as special accessory for virtuosa 153 QE
*** Available as special accessory for virtuosa 163