Table of Contents
Advertisement
Setting up the machine
Threading the upper thread
10
A
· raise the needle and presser foot
· turn the power switch to 0
· place spool on pin and attach the appropriate spool disc
·
– diameter of spool = disc size
· take thread through rear guide A
· then into slit of upper thread tension
· pull thread down to the right of the take-up cover to B
· then up to the left of the cover to C
· and down through guides D and E
Needle threader
A
· lower the presser foot
· lay the thread behind
·
hook A and hold lightly
Bringing up the lower thread
B
· press lever B down
· hold the upper thread
· sew one stitch
· pull the upper thread until the bobbin
thread appears in the stitch plate hole
· pull bobbin thread out of the hole and
insert both threads through the slit in the
presser foot towards the back
· pull threads over the cutter
C
B
D
E
Refer to the safety instructions!
C
· take the thread in front
·
of the needle C
· pass the thread from the
·
bottom to the top of the
·
needle until it catches in
·
the hook
C
D
E
· let go of lever B and
·
thread
· pull the thread loop
·
through the needle eye
Note:
The bobbin thread must
be brought up through the
stitch plate for certain
types of work.
The length of thread is
sufficient for most normal
work if the lower thread
cutter has been used.
Hide quick links:
Advertisement
Table of Contents
