Installing The Driver For A Cna Card For Fcoe, Iscsi, And Nic Protocols; Installing The Driver For The Avago 9286 Cv-8E Hba Card; Installing The Driver For The Avago 9300-8E Hba Card - Lenovo ThinkServer TD350 Installation Manual

Installing the driver for a CNA card for FCoE, iSCSI, and NIC protocols

This topic provides instructions on installing drivers for the following CNA cards:
• Emulex OCe14102
• Emulex OCe14401
• Emulex OCe14102–NX
To install the driver for a CNA card for FCoE, iSCSI, and NIC protocols, do the following:
1. Download the driver for a CNA card from the Lenovo Web site. If the driver is a compressed file, unzip it
to a folder. Then, copy the folder to your USB storage device and connect the USB storage device to
your server.
2. Log in to the operating system and copy the folder from your USB storage device to the /tmp directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
cd /elx-lpfc-dd-sles11sp-10.2.185.0
./elx_lpfc_install.sh
Note: In the command lines, elx-lpfc-dd-sles11sp-10.2.185.0 represents the name of the folder that the
drive is stored. elx_lpfc_install.sh represents the driver name. Use the corresponding file name on your
server.
4. Restart your server.

Installing the driver for the Avago 9286 CV-8e HBA card

To install the driver, do the following:
1. Download the driver from the Lenovo Web site. If the driver is a compressed file, unzip it to a folder. The
most up-to-date device drivers for various server models are always available for download on the
Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to your USB storage device and connect the USB storage device
to your server.
3. Log in to the operating system and copy the folder from your USB storage device to the /tmp directory
on your server.
4. Use the following commands to install the driver:
cd /tmp
cd rpms-2
rpm-ivh *.rpm
Note: In the command lines, rpms-2 represents the name of the folder that the drive is stored. *.rpm
represents the driver name. Use the corresponding file name on your server.
5. Restart your server.

Installing the driver for the Avago 9300-8e HBA card

To install the driver, do the following:
1. Download the driver from the Lenovo Web site. If the driver is a compressed file, unzip it to a folder. The
most up-to-date device drivers for various server models are always available for download on the
Lenovo Web site at:
http://www.lenovo.com/drivers
108
ThinkServer TD350 Operating System Installation Guide